High-temperature paint for application on new, bare or shot-blasted metal or on pre-treated supports such as barbecues, heating installation, exhaust outlets, etc. for resistance up to 750 ° C (after drying).
The ALKYTON high temperature is suitable for maintenance or repair work.
- Paint system based on modified alkyd resin and urethane
- Excellent hiding power
- Extraordinary grip
- High temperature resistance, up to 600 ° C, and for non-prolonged exposures, up to 750 ° C
Before application, read the attention texts carefully and observe the recommendations for use!
Substrate preparation
The support must be free of grease, oil, rust. Remove the non-adhering parts of rust. Sand the previous paint layers to allow good adhesion of the paint. During application, the support must be clean and dry.
Mixing and dilution
Before use, mix the paint effectively. No dilution is required!
Painting
Application at a temperature between 5 ° C and 25 ° C and at a humidity level below 85%. Apply with a brush. The viscosity of the product does not allow spraying.
Cleaning: with thinner based on synthetic resin