MX 100 WATERPROOF WATER REPELLENT. WALLS, FACADES 5 L
Water repellent waterproofing for exterior masonry.
Applies to all porous materials: brick facade, stone facade , concrete, cement, plaster, reconstituted stone, terra cotta, tile, fiber cement, self-blocking pavers ...
Clean the supports with NET'Murs cleaning degreaser before waterproofing.
Based on organomineral resin in aqueous phase, the MX100 waterproofing roofing and facade is a water repellent that limits water infiltration, and effectively fight against crumbling, bursting ... during freeze / thaw cycles.
Invisible, it does not form a film and lets breathe the support.
It is used on vertical surfaces and can be used around the vegetation without affecting its development.
Theoretical yield per liter. On a non-absorbent background or with fine granulosity.
Provide a lower yield on dry wood, coarse plaster or porous surface.
To calculate the surface of a wall:
Width x Height = surface to be painted .
" Surface to be painted " divided by the performance of the paint = amount of paint required per layer.
Example for a wall wall:
Width = 4m50
Height = 2m40
paint yield = 6m2 / ltr
4.5 X 2.4 = 10.8m2 / 6 = 1.8 ltr per layer (round to 2 liters)
Example for woodwork:
3 doors with frames. Provide 2m2 per face.
Yield of painting 14m2 / ltr
6 X 2m2 = 12m2 / 14 = 0.85ltr per layer (round to 1 liter)
- 3m2 / Liter
- 5m2 / Liter
- Ready to use