MX 210 waterproofing tinted, SLATE 1 L
The MX210 is a tinted waterproofing agent for outdoor use.
It is used on dirty porous / greasy materials, or clean (interlocking pavers, cement slabs ...).
Do not overload the substrate, remove any excess before drying.
Oil-repellent , the MX210 penetrates deep into the support, limits water infiltration, and makes it possible to fight effectively against crumbling, splintering ... during freeze / thaw cycles.
It offers protection paved soil / concrete floor against grease, oil and grease (dietary fat, oil drain): it is a long-lasting anti soil stain .
Based on organomineral resin in aqueous phase, the tinted waterproofing MX210 does not form a film, it lets breathe the support.
In addition to optimal protection, it allows to restore the color of pavers. It is therefore ideal for renovating tarnished floors.
Theoretical yield per liter. On a non-absorbent background or with fine granulosity.
Provide a lower yield on dry wood, coarse plaster or porous surface.
To calculate the surface of a wall:
Width x Height = surface to be painted .
" Surface to be painted " divided by the performance of the paint = amount of paint required per layer.
Example for a wall wall:
Width = 4m50
Height = 2m40
paint yield = 6m2 / ltr
4.5 X 2.4 = 10.8m2 / 6 = 1.8 ltr per layer (round to 2 liters)
Example for woodwork:
3 doors with frames. Provide 2m2 per face.
Yield of painting 14m2 / ltr
6 X 2m2 = 12m2 / 14 = 0.85ltr per layer (round to 1 liter)
- 5 to 10m2 / ltr
- Ready to use