Zenit Hydromatt Power 12.5 Liter
Zenit Hydromatt Power is a new generation of aqueous paints for interiors. Through the use of innovative binders System (EPS *), it almost always gets me-me bottomless special optimal traction on smooth plaster in-products and other mineral surfaces. This painting shows a good permeability to water vapor, a very good coverage, a long open time and does not yellow. The excellent properties of implementation and low tendency to allow splash of working on large surfaces exposed to light ra-nents, leaving no visible joints. This product is idealistic for the new and the renovation of interior spaces contain little solvent and low odor. It is also perfectly suitable for application on plaster coatings to-read, plaster cement and lime, concrete, plaster (especially for smooth plaster coatings and sealants), synthetic coatings, as well as previous coatings as stable dispersions and matte paintings.
(* = EBS system emulsified binders)
Theoretical yield per liter. On a non-absorbent background or with fine granulosity.
Provide a lower yield on dry wood, coarse plaster or porous surface.
To calculate the surface of a wall:
Width x Height = surface to be painted .
" Surface to be painted " divided by the performance of the paint = amount of paint required per layer.
Example for a wall wall:
Width = 4m50
Height = 2m40
paint yield = 6m2 / ltr
4.5 X 2.4 = 10.8m2 / 6 = 1.8 ltr per layer (round to 2 liters)
Example for woodwork:
3 doors with frames. Provide 2m2 per face.
Yield of painting 14m2 / ltr
6 X 2m2 = 12m2 / 14 = 0.85ltr per layer (round to 1 liter)
- 7m2 / liter
- Ready to use
- adhesion directly on plasters
- perfect finish