High quality airless satin varnish, water-dilutable, easy to apply, for interior surfaces particularly resistant to wear and mechanical stress.
For high-quality interior surfaces, such as door surfaces, frames, etc.
One-pot system intended for renovation, to be used on old coatings after an adequate pre-treatment, or on untreated substrates after an adequate pre-treatment and primer.
Properties:
The innovative cross-linking technology provides a scratch and impact resistant surface, especially for bright and/or strongly colored shades. Resistant to dirt, grease, hand sweat and many commercial alcohol-free sanitizers.
Easy implementation by the combination of a low spray pressure (< 60 bars) and a high wet layer thickness of up to 300 μm.
Méthode d'application
- Pinceau
- Rouleau
Size
5 Ltr
Brand
Sikkens
Color
Coverage
Theoretical yield per litre per coat. On a non-absorbent or fine-grained substrate.
Expect lower yields on dry wood, coarse plaster or porous surfaces.
To calculate the surface area of a wall:
Width x Height = surface to be painted .
" Surface area to be painted " divided by the paint yield = quantity of paint needed per coat.
Example for a wall panel:
Width = 4.50m
Height = 2.40m
Paint coverage = 6m²/liter
4.5 x 2.4 = 10.8m² / 6 = 1.8 liters per coat (round up to 2 liters)
Example for woodwork:
3 doors with frames. Allow 2m2 per side.
Paint coverage: 14m²/liter
6 x 2m² = 12m² / 14 = 0.85 liters per coat (rounded to 1 liter)
- 150-300ml/m2
Dilution
- Do not dilute
Please sign in so that we can notify you about a reply