Alphasol Silikat paint is a highly vapor-permeable, matte, low-emissivity, solvent-free, sol-silicate-based interior wall paint. As a silicate-based coating material conforming to DIN 18363, this paint contributes to creating a natural indoor climate.
Alphasol Silikat has a very low tendency to splash. It is quick and easy to apply, as it adheres to many organic and mineral substrates, such as concrete, plaster or old coatings – and this without any adhesive agent.
Other advantages of Alphasol Silikat paint
- Class 1 coverage
- Class 2 wet ribbing
- Extremely easy application
- Silica-based matte surface (approx. 0.8 to 1.0 GU)
- Product free of solvents and plasticizers, and therefore containing no active fogging substances
- Suitable for buildings listed as historical monuments
- Forms little tension
- High permeability to water vapor
- Direct adhesion to a white plaster coating
- Product is difficult to ignite.
- Provides natural protection against fungi
- Does not form a film
- Silicate-based paint conforming to DIN 18363
- Meets the requirements of the MINERGIE-ECO label
Contains 1,2-benzisothiazol-3(2H)-one, octhillinone (ISO) and CMIT/MIT (3:1). May produce an allergic reaction.
Warning! Dangerous respirable droplets may be formed during spraying. Do not breathe aerosols or mists.
- Airless - Airmix
- Brush
- Roll
Hiding class according to DIN13300
The covering power is expressed in m²/l or in m²/kg. Paints are listed from class 1 (higher hiding power) to class 4 (lower hiding power).Wet abrasion resistance Class 1 (very high) Cleaning the paint with water and a natural bristle brush. Possibility of adding a neutral or hygienic cleaner. Suitable for heavily used interior surfaces, e.g. entrances to houses, kitchens, stairways and public buildings. |
Wet abrasion resistance Class 2 (according to DIN 53778) Cleaning the paint with water and a natural bristle brush. Possibility of adding a neutral or hygienic cleaner. Suitable for heavily used interior surfaces, e.g. children's rooms or bathrooms. |
Wet abrasion resistance Class 3 (according to DIN 53778) Cleaning the paint with water and a cloth or sponge. Possibility of adding a neutral detergent. Suitable for interior walls and ceilings that are not subject to repeated friction. |
- Mast
- 7m2/ltr
- Ready to use
- Water
- easy to apply
- High coverage
- Minergie-ECO
- Natural raw material
- inside