• High-gloss, two-component, colorless varnish that is highly scratch-resistant and offers excellent resistance to fuel, UV rays, and weathering.
• Extended usage time
• Quick drying
• Very nice transitions
• Easy to polish
• Economical 200ml pack to avoid waste

Application

• Basic paints can be coated with 2K Hi-Speed ColorMatic clear gloss varnish after 30 minutes of air drying.
• 2 to 3 complete passes, 50µ
• Approximately 2 minutes of rest between passes

Mixing component A with the hardener:

• Remove the safety cap on the bottom of the packaging and pull the rod out using the integrated ring until it stops. This will allow the blade to be inserted. The blade will then pierce the wall of the aluminum cartridge.
• By rotating the cartridge 360°, it is then fully opened and the hardener is released.
• By vigorously shaking the can, component A then mixes with the hardener according to the correct and prescribed dosages.
• Shake the can vigorously for 2 minutes.
• Try it out
• Usage time: 24 hours (20°C)

Ready-to-use coatings containing isocyanates can irritate the respiratory system and cause hypersensitivity. Inhaling paint vapors or mists can lead to sensitization. When handling isocyanate-based coatings, all precautions applicable to solvent-based coatings must be followed. In particular, inhaling paint vapors and mists is strictly prohibited. People with allergies, asthma, or respiratory conditions should not work with isocyanate-based coatings.

• For professional use only
• Wear appropriate respiratory protection (we recommend type A2/P3)