Water-based 1K or 2K light-stable topcoat . Good coverage and filling power, good resistance to chemicals and mechanical stress. Use as a 2K product for even higher performance.
- Good resistance to chemicals and mechanical stress
- Can be used in single-component or two-component version (for better performance)
- Open and closed pores
- Non-yellowing, light stable in all conditions
Main areas of application:
Interior, Furniture, Cabinets, Kitchen, especially for bathrooms (if combined with a sealer or insulating primer)
Application:
Airmix/Airless spray system, High/low pressure spray system
DRYING TIME AT 20˚C
| Dust dry | At least 40 minutes |
| Dry to the touch | At least 1 hour |
| Ready for transport | At least 12 hours |
| Sandable | At least 4 hours |
PREPARATION OF SUBSTRATES
| MDF - moisture free | Pre-treat with AQUALIT COLOR primer. Final sanding of the primer with P280 - P320 grain size. |
| MDF - moisture free | Pre-treat with AQUALIT COLOR IP360 (cured) until a closed and flat surface is obtained. Final sanding of the primer with P280 - P320 grit. |
brightness
10 Mat
Packaging
20 Kg
Brand
Sikkens Wood Coatings
Color
Compatible hardener
- HWA6000
Coverage
Theoretical yield per litre per coat. On a non-absorbent or fine-grained substrate.
Expect lower yields on dry wood, coarse plaster or porous surfaces.
To calculate the surface area of a wall:
Width x Height = surface to be painted .
" Surface area to be painted " divided by the paint yield = quantity of paint needed per coat.
Example for a wall panel:
Width = 4.50m
Height = 2.40m
Paint coverage = 6m²/liter
4.5 x 2.4 = 10.8m² / 6 = 1.8 liters per coat (round up to 2 liters)
Example for woodwork:
3 doors with frames. Allow 2m2 per side.
Paint coverage: 14m²/liter
6 x 2m² = 12m² / 14 = 0.85 liters per coat (rounded to 1 liter)
- 100-120g/m2
Dilution
- Water
Please sign in so that we can notify you about a reply