Long-lasting disinfectant detergent suitable for:
-Clean walls and surfaces from dirt and mold (after treating mold stains with Sestricid).
-Prevent the proliferation of mold and fungus.
Use:
Use Sestricid to remove any mold deposits from the surface to be treated then apply the product to the surface, distributing it evenly. Wait at least 24 hours for drying before finishing and if necessary repeat the operation to increase the effect.
Packaging
1 Ltr
Brand
Sestriere Vernici
Color
incolore
Coverage
Theoretical yield per litre per coat. On a non-absorbent or fine-grained substrate.
Expect lower yields on dry wood, coarse plaster or porous surfaces.
To calculate the surface area of a wall:
Width x Height = surface to be painted .
" Surface area to be painted " divided by the paint yield = quantity of paint needed per coat.
Example for a wall panel:
Width = 4.50m
Height = 2.40m
Paint coverage = 6m²/liter
4.5 x 2.4 = 10.8m² / 6 = 1.8 liters per coat (round up to 2 liters)
Example for woodwork:
3 doors with frames. Allow 2m2 per side.
Paint coverage: 14m²/liter
6 x 2m² = 12m² / 14 = 0.85 liters per coat (rounded to 1 liter)
- 10m2/ltr
Dilution
- Ready to use
Please sign in so that we can notify you about a reply