Polyurethane-reinforced satin lacquer, for interior and exterior, can be diluted with water.
- Polyurethane reinforced varnish, washable, resistant to wear and cleaning products
- Little odorous.
- Very good flow and high covering power
- Heat resistance up to 80 ° C
- Does not turn yellow
- No thermoplasticity
- Hand sweat resistant
- Slightly satin shine with a noble appearance (20-25GU)
- Easy to use thanks to a very long opening time
Use:
For high-end, wear-resistant finishes, inside and out. Application, after suitable preparation of the substrate, on wood, materials derived from wood, metals, hard plastics as well as on old coatings. Outside only for elements with dimensional stability and protected against the action of bad weather. Thanks to its resistance up to a temperature of 80 ° C, this varnish can also be applied to radiators.
Properties:
Easy to use, low odor, good flow and high covering power. Allows to obtain surfaces resistant to wear, scratches and yellowing with good blocking and good gloss stability.
Méthode d'application
- Pinceau
- Rouleau
Size
500 ml
Brand
Sikkens
brightness
- Satin-matt
Color
Coverage
Theoretical yield per litre per coat. On a non-absorbent or fine-grained substrate.
Expect lower yields on dry wood, coarse plaster or porous surfaces.
To calculate the surface area of a wall:
Width x Height = surface to be painted .
" Surface area to be painted " divided by the paint yield = quantity of paint needed per coat.
Example for a wall panel:
Width = 4.50m
Height = 2.40m
Paint coverage = 6m²/liter
4.5 x 2.4 = 10.8m² / 6 = 1.8 liters per coat (round up to 2 liters)
Example for woodwork:
3 doors with frames. Allow 2m2 per side.
Paint coverage: 14m²/liter
6 x 2m² = 12m² / 14 = 0.85 liters per coat (rounded to 1 liter)
- 14m2/ltr
Dilution
- Ready to use
- Water
Specificities
- easy to apply
- fast drying
- High coverage
- Long life expectancy
- Manual preparation
- Minergie-ECO
- Washable
Please sign in so that we can notify you about a reply