Sol-silicate-based matte paint for interior use, suitable for many substrates without a primer. Good coverage: one coat is usually sufficient, especially when applied with an airless sprayer. Herbol SOL Silikat meets the requirements of DIN 18363 section 2.4.1 for silicate-based dispersion paints.
Category A, preservative-free.
Sol-silicate matte paint suitable for many surfaces
-Also perfectly suited for airless application
-Good coverage. In the case of airless application, a single coat is usually sufficient
-Free from preservatives
- Can be used without a primer on many surfaces
-Compliant with DIN EN 13300 standard, wet abrasion class 2 and opacity class 2 (for 8 m²/l)
-Natural matte mineral surfaces
- Guaranteeing a pleasant indoor climate
Suitable for application in new buildings and for renovating paintwork in residential and commercial settings
- Also meets the requirements of DIN 18363, section 2.4.1, dispersion silicate-based paint
-Low emissions and low odor, free of solvents and plasticizers
Warning! Dangerous respirable droplets may be formed during spraying. Do not breathe aerosols or mists.
- Airless - Airmix
Hiding class according to DIN13300
The covering power is expressed in m²/l or in m²/kg. Paints are listed from class 1 (higher hiding power) to class 4 (lower hiding power).Wet abrasion resistance Class 1 (very high) Cleaning the paint with water and a natural bristle brush. Possibility of adding a neutral or hygienic cleaner. Suitable for heavily used interior surfaces, e.g. entrances to houses, kitchens, stairways and public buildings. |
Wet abrasion resistance Class 2 (according to DIN 53778) Cleaning the paint with water and a natural bristle brush. Possibility of adding a neutral or hygienic cleaner. Suitable for heavily used interior surfaces, e.g. children's rooms or bathrooms. |
Wet abrasion resistance Class 3 (according to DIN 53778) Cleaning the paint with water and a cloth or sponge. Possibility of adding a neutral detergent. Suitable for interior walls and ceilings that are not subject to repeated friction. |
- Mast
- 8m2/ltr
- Water
- Brique silicocalcaire,
- concrete,
- Murs intérieurs,
- Plaster