presto epoxy resin is a two-component, solvent-free, liquid and slightly transparent repair, coating and laminating resin.

Areas of use:

• for repairing, bonding and coating porous and smooth surfaces
• as impregnating resin for fiberglass reinforced coatings and molded parts
• as casting mass for transmissions and other hollow spaces
• for creating waterproof coatings, e.g. waterproof coatings of gutters, pipes and trays
• for the creation of particularly firm and light fiberglass molded parts: in combination with fiber reinforcement, suitable for coatings and hoods in the automotive, appliance and model making sectors.
• all woodworking
• concrete flooring
• repair of boats, vehicles and other castings

Application :

• Precisely dose components A and B (resin and hardener) and mix them carefully (A / B ratio of 60 / 100 in terms of weight). The yellowish mixture is now ready for application.
• Apply to the surface to be touched up using a brush, roller or spatula.
• The open time for application is approx. 30 minutes for temperatures between 18 and 25°C.
• In most cases, the application is carried out in two layers to obtain a sufficient thickness between 300 and 400 µm.
• The second application can be made within 24 hours as long as the surface remains tacky.
• Final hardness and resistance to heat and chemicals are obtained after 5 days (at 20°C).
• Do not return mixed material residues to the packaging!
  
  
• Increased chemical resistance and hardness are achieved after exposure to a temperature of 50°C for more than 24 hours.
• To bind and create an epoxy mortar, the material is mixed in a 1 to 7 weight ratio (approximately 1 to 3 volume ratio) with quartz sand or quartz powder.
• For lamination, the amount of resin needed is three times the weight of fiberglass for fiberglass mat use and the weight of fiberglass for fiberglass textile.