High performance multi-support water-dilutable acrylic enamel for floors and vertical surfaces.
Its formulation guarantees a resistant and durable film, applicable indoors and outdoors on multiple surfaces.
Easy to apply, it is suitable for DIY or professional users in civil and public environments even with high traffic.
The addition of "REFLOW Adhesion Promoter" allows direct application to cement, ceramics, stoneware, stones, tiles, formica, masonry, melamine and old existing paints.
Once mixed with the additive, the product can be used for 48 hours. After this time, the effectiveness of the additive decreases but, unlike a traditional two-component product, the product can still be used!
To regain the full effectiveness of the product, a new dose of adhesion promoter can simply be added.
Ideal in case of touch-ups during or after the construction site!
It complies with the UNI 11021:2002 standard for applications in environments where HACCP (food premises compatible) is required and, with the REFLOW ANTISKID additive, it is certified anti-slip in accordance with the DM 236 standard of 1989.
Features:
- High resistance
– Easy and versatile
– Direct application to various surfaces
Appearance: Satin
Color: White & Colors according to color chart or custom-made
Packaging sizes: 750ml & 2.5 liters
Preparation and Application of Substrates
SUBSTRATES | PREPARATION | APPLICATION |
---|
TILES, SLABS, CERAMIC, TERRACOTTA, STONEWARE, KLINKER | Remove any impurities, dirt, grease or oily substances by washing with a suitable neutral degreaser and lukewarm water. Wait for the substrate to dry completely, taking care of the grout lines. | Add the REFLUX PROMOTER to the REFLUX ENAMEL and mix well for a few minutes. Apply 2 coats of REFLUX ENAMEL spaced at least 12 hours apart each. On horizontal surfaces, to obtain appropriate anti-slip before applying the product. In case of horizontal surfaces, practicability is achieved 24-48 hours after application of the second layer while complete polymerization, which guarantees the greatest resistance, is obtained in 7-10 days. |
GROSS CEMENT | Remove any impurities, dirt, grease or oily substances by washing with a suitable neutral degreaser. Wash well. Wait for the substrate to dry completely. Remove any dust. Useful advice: check the humidity of the substrate with specific instruments and avoid painting in case of obvious humidity. |
PAINTED CONCRETE | In the presence of layers of paint that are not well anchored, carry out manual or mechanical sanding until they are completely removed and also remove any dust generated. If the previous paint is well anchored, remove all impurities, dirt, grease or oily substances and, if necessary, carry out manual or mechanical sanding. Remove any dust. Useful advice: check the humidity of the substrate with specific instruments and avoid painting in case of obvious humidity. |
FORMICA, LAMINATE, SHEETS | Remove any impurities, dirt, grease or oily substances by washing with a suitable neutral degreaser. Sand the surface with 150-grit sandpaper or a fine-grit abrasive sponge to remove any protective finish used in the production process of these materials. |
SPC, LTV, RIGID PVC FLOORING | Sand the surface with 150-grit sandpaper or a fine-grit abrasive sponge to remove any protective wax used in the production process of these materials. Remove any dust and other impurities, dirt, grease or oily substances. |
Fiche technique (REFLOW_SATINATO_13.06.2024_FR.pdf, 359 Kb) [Download]
Certification HACCP (REFLOW_CERTIFICAZIONE_HACCP.pdf, 1,076 Kb) [Download]
Certification antidérapant (REFLOW_CERTIFICAZIONE_ANTISKID.pdf, 97 Kb) [Download]