High-filling water-based white primer that can be used in 1K or 2K. When used as 2K, the product can be used in damp rooms due to its excellent insulating properties. In addition, in 2K, it can be overcoated with solvent-based products from the Quantum and Solido range.
- high filling power, especially on MDF edges
- can be used as 1 or 2 pack (the 2 pack will provide excellent insulating properties against wood components and allow it to be used in damp rooms)
- when used in 2k: it is an adhesion promoter for many plastics and metals
- light resistant
PREPARATION OF SUBSTRATES
Raw wood surfaces. Gradual sanding of the wood. Carefully remove sanding dust. Coarse-pored woods should be brushed | P120, P150, P180 |
Plastic sheet panels (e.g. HPL or melamine resin) must be carefully sanded. Aluminum panels must be clean and free of grease and silicone. | P320 / P400 |
Metals should first be degreased with a clean diluent such as TPU 9300-F and must then be lightly sanded with fine sandpaper. Plastics should be cleaned and lightly sanded with an abrasive sponge or sanding block. As an adhesion promoter, the product can only be applied as a two-component product. hardened. In general, the applicator should test the adhesion properties. | P400, P600 |
Fiche technique (acip360.pdf, 617 Kb) [Download]